Soundproofing Barrier Panels
All of our acoustic panels are designed to “absorb” echoes within a room to lower the level of background noise and make the room sound better. However, most acoustic panels do little to combat sound bleeding through the wall to an adjoining room. The one exception to this rule is our FabricBloc soundproofing panel. These are a hybrid sound absorbing wall panel that combines to both “block” noise from bleeding through your common wall to the adjoining room, as well as “absorb” echoes reflecting back off the wall into your same room. FabricBloc panels are constructed by sandwiching a layer of our dB-Bloc between two 1″ thick Fabric Panels. The resulting panel is 2-1/8″ thick.
Questions? Call 1-800-638-9355
The Right Solution
The goal with FabricBloc Panels is to isolate one room’s noise from an adjacent room without needing to re-drywall the surface. FabricBloc soundproofing panels can easily be affixed to any existing finished surface, or be recessed into any new build or remodel project where sound isolation is a must.
These sound absorbing wall panels are available in 44 color options, and we will cut them to match the cavity size of your common wall surface. Care should be given to cover 100% of the common sound barrier wall, or the noise will bleed around it and through to the next room over. Color chart listed below. Free color swatches upon request!
Pricing
For our FabricBloc Panels to be effective at blocking sound, 100% surface coverage is required. Due to this, FabricBloc Panels are custom-quoted on a per-project basis. Note that you can have us cut the panels to any size required for your treatment up to a maximum size of 4′ x 10′. All FabricBloc soundproofing panels are shipped with square edges that are not resin-hardened so they can “squish” together to create a tight seal between adjacent panels.
Questions? Call 1-800-638-9355
Case Studies
NetWell rotates a variety of colorful sound panel treatments through our Case Studies Library. These soundproofing applications showcase the variety of panel styles, colors, and designs our panels are known for. Be sure to check them out!
See Case StudiesTips & Techniques
The purpose of the FabricBloc Panel treatment is to provide sound isolation between two adjacent rooms without having to renovate the existing walls. Usually, only one side of the wall needs to be treated. The panels should go on the side of the wall that is producing the most sound. If the room has a drop ceiling, you may also need to add Ceiling Caps to prevent sound from passing through through the ceiling plenum.
Questions? Call 1-800-638-9355
See Ceiling CapsSound Test Results
Installation and Shipping
FabricBloc Panels will ship with a set of mechanical clips that can be used to easily anchor the panels to your wall. These sound barrier panels will be heavy, so they need to be supported by the floor, the clips are there simply to hold the panels against the wall. The density of the panels is what gives them their sound-blocking properties. They will be carefully packaged and edge protected, shrunk wrapped on pallets, and shipped to your project site. Be sure to inspect the order upon delivery and sign for anything that may appear to have been damaged in transit.
Shipping/Receiving Terms & Conditions